Chromatography Supplies
Thermo Scientific Thermostat Kit 2pk
Kit contains support ring and piston seal for repairing and maintaining piston seal assembly in pneumatic, hydraulic and reciprocating pump applications; provides tight dynamic seal between piston and cylinder bore allowing smooth linear movement.
Microsolv Technology Corporation Ferrules, for use with Two Piece, High Pressure, Tubing Connectors for 1/16" PEEK Tubing. Universal Single Cone. 10/PK.
This Single Cone Ferrule will swage on to the PEEK tubing in one place for a good grip on the tubing.Use with any PEEK, 2 Piece, 1/16" Tubing Connectors (Male Nuts).
Microsolv Technology Corporation Tubing, PEEK, Coiled, 0.030" ID, 1/16" OD. 710mm L, General Grade, Green, with Tubing Connectors. 1 EA.
These Flexible, Coiled PEEK Tubes will expand and contract which will save space in places such as behind an instrument and provide a Pulse Dampener Effect for Parabolic Flow Fluids which will result in a quieter base line and also reduce band broadening due to excess tubing lengths. This coil is 10mm wide when resting and 30mm when fully extended, with a total tubing length of 700mm, end to end. Color Coded: Green for 0.030" (0.75mm) ID
Microsolv Technology Corporation Tubing, PEEK, 0.040" ID, 1/16" OD, HPLC Grade, Grey Stripe. 25 Meter Roll. 1 EA.
This HPLC Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The red stripe is added only to the outside of the tubing leaving the interior all natural PEEK which eliminates leachables due to color. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color Code: Grey Stripe for 0.040" ( 1.0mm ) ID. Pressure rating: 2400 psi.
Microsolv Technology Corporation Union, Connector Kits, Tee, High Pressure, 0.50mm Through Holes with 10-32 Screw Threads. Carbon PEEK, with Connector Nuts. Use with 1/16" Tubing. 2/PK.
These "Union" Tee's are used to connect the same size PEEK or Stainless Steel tubing on all ends, in the high pressures zones of HPLC systems. A "Tee Connection" is often used to split flow into two directions or to combine two streams into one. Supplied with 2 Tee Unions and Four Finger Tightened Connectors (nuts). Carbon PEEK has been reinforced with carbon fiber, giving it the highest strength and stiffness of all the PEEK grades and improving its load-carrying capacity.
Microsolv Technology Corporation Union, Connector Kits, High Pressure, 0.50mm Through Hole with 10-32 Screw Threads. Carbon PEEK, Straight Line with Connector Nuts. Use with 1/16" Tubing. 2/PK.
This "Union" is used to connect the same size PEEK or Stainless Steel tubing on both ends, in the high pressures zones of HPLC systems. Supplied with 2 Straight Line Unions and Four Finger Tightened Connectors (nuts). Carbon PEEK has been reinforced with carbon fiber, giving it the highest strength and stiffness of all the PEEK grades and improving its load-carrying capacity.
THERMO SCI 3P AIG PARTS & ACCESSORIES CAPILLARY 500 UM 4.87 LONG
501349419 CAPILLARY 500 UM 4.87 LONG
Microsolv Technology Corporation Union, Column Coupler, Universal Fit 0.18mm through Hole with 0.007" ID tubing. Color Coded Yellow. PEEK. 1 EA.
This convenient Column Connector is used to join two HPLC columns or a guard column and an analytical column in series. Sleeve is color coded Yellow to identify the tubing internal diameter and is made from polypropylene. Tubing is all PEEK material and is made from Super-T Tubing for precise concentricity and better performance.
Microsolv Technology Corporation Tubing, PEEK, 0.010" ID, 1/16" OD, HPLC Grade, Blue Stripe. 25 Meter Roll. 1 EA.
This HPLC Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The red stripe is added only to the outside of the tubing leaving the interior all natural PEEK which eliminates leachables due to color. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color Code: Blue Stripe for 0.010" ( 0.25mm ) ID. Pressure rating: 5600 psi.
Waters Corp ZenFit Assembly, Capillary and Fittings, 40µm x 26";
ZenFit Assembly, Capillary and Fittings, 40µm x 26";
THERMO SCI 3P AIG PARTS & ACCESSORIES FTG NUT FLGLS SHORT 1/4-28X1/8
NC0544954 FTG NUT FLGLS SHORT 1/4-28X1/8